Bash plate for sale

19 replies [Last post]

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Date: Thu, 11/10/2012 - 5:31pm

I thought that I would put the last bash plate for sale here,

bash plate ORDER one extra buyer needed

The best I found was $210 each, this is the price if we buy 3 bash plates. This is an "online" order.

The plate are made in 5 mm aluminium checker plate (a bit more expensive than the standard aluminium plate), NO "pajero io" cut out. While this cut out does look great, I think that it does become a weak point in the bash plate. I can make the fixation hole, it will be easier to fit.

I may have found one buyer (to confirm in the next few days...) I need to found another buyer. Bob said that transport should be around $30, I don't think that he is too far out!

If you are interested....let me know.....$210 + $30 freight

Happy io

Edit, 10/10/2012 I though that someone would be interested.....For me to get this price, I need a third buyer....If it does help, I am happy to keep the freight at $15, if it is more, I will pay it. I cannot put the maker of these plates on hold for too long (a week or so?...)....So the most you will pay is $225 delivered.

You can contact me by email :

Happy io.

Edit 11/10/2012 I now have one confirmed buyer + one for me, only one bash plate left for $225 delivered.

Happy io

Edit SORRY LAST PLATE IS NOW ON HOLD

Edit 18/10/2012 All sold Thank you.

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

singlecell

Online Status: Offline
Joined: 06/07/2011
Posts:

Post Number: #1
Post Date: Thu, 11/10/2012 - 6:36pm

.

Claude Ill get one, thats cheaper then I can do here. I am keen to have checker plate also (and painted black). My one issue is I wont be able to transfer money till Wednesday 17th.

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #2
Post Date: Thu, 11/10/2012 - 9:13pm

Bash plate

I will send you an email....

Thanks,

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #3
Post Date: Fri, 12/10/2012 - 1:04pm

Bash plate

Hi Singlecell,

I have send you an email, late yesterday, for you to confirm that you are buying this plate, if you haven't received it, or change your mind, or whatever... let me know...

Happy io.

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

singlecell

Online Status: Offline
Joined: 06/07/2011
Posts:

Post Number: #4
Post Date: Fri, 12/10/2012 - 2:50pm

.

Claud, I have not received it.... The only email I have from you is from when you sent me those diff photos.

singlecell83@gmail.com

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #5
Post Date: Fri, 12/10/2012 - 3:12pm

.

This have happen to me a couple of time in the last month....I have send it again, just now...hopefully it will work...

Happy io....

Edit, 12/10/2012 around 7.00pm

Let me know if you have received (or not!) the 2 emails this afternoon that I send you, you might have to send me an email and I will reply, or give me another email address.....

I hope that we can communicate to make it work.....

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

GO-R

Online Status: Offline
Joined: 13/05/2012
Posts:

Post Number: #6
Post Date: Thu, 07/11/2013 - 10:30am

Any chance of getting another

Any chance of getting another round of bash plates made up?

1999 Pajero iO named Rex

245/75R16 Trail Digger, 2" KYB and King Spring Lift, 50mm Front Shock Spacers, 25mm Diff Drop Spacers, 50mm Rear Spring Spacers, Rear Hilux Shocks, Upgraded Pan Hard Rod, Bull Bar, Roof Racks and Winch.

bob_oz

Online Status: Offline
Joined: 31/03/2011
Posts:

Post Number: #7
Post Date: Fri, 22/11/2013 - 10:04am

another round of plates made up

sure - Claude can get them done in batches of 3, so can I.

I can get them in flat 6mm aluminium laser cut with/without the lettering but without mounting holes as ALL the io's we've fitted them too have been quite different (+/-10mm!!!!)

get 3 people, post it up - message me and let me know. about $180-$200 per plate is normal

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #8
Post Date: Fri, 22/11/2013 - 12:28pm

bash plate

I am no longer able to do them...Bob is your only option at a very good price.

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

GO-R

Online Status: Offline
Joined: 13/05/2012
Posts:

Post Number: #9
Post Date: Fri, 22/11/2013 - 12:32pm

I'm really keen to have one

I'm really keen to have one made up, only problem is I'm not sure how it fits with the bullbar. I have a feeling that I need to make the drawing a little bit longer to sit up inside the bullbar.

Has anyone fitted this bash plate design to an iO with the bullbar?

1999 Pajero iO named Rex

bob_oz

Online Status: Offline
Joined: 31/03/2011
Posts:

Post Number: #10
Post Date: Fri, 22/11/2013 - 2:06pm

plate + bullbar

no - havn't run one with a bullbar like yours,

PM me your postal address and I'll mail you a paper template of the plate, you can tansfer it to cardboard and trial-fit it on your io. might find that the front needs to be trimmed off short - this i can do with my aluminium circulat saw.

I'll mark my bolt holes so you can line up with your bolts.

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #11
Post Date: Mon, 27/01/2014 - 8:12am

pajero io bash plate for sale

We all know where this bash plate come from :) If someone is looking to get one, here it is....

http://www.gumtree.com.au/s-ad/southport/auto-body-parts/pajero-io-bash-plate/1037268254

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

shadowarrior

Online Status: Offline
Joined: 19/12/2012
Posts:

Post Number: #12
Post Date: Mon, 27/01/2014 - 9:55am

That looks like my bash

That looks like my bash plates....in front of my house. :/ Hmm, looks like the Mrs has put them up on Gumtree already.

If anybody from the club wants to buy the bash plate, ping me here. Ignore that price, I'll sell it at what it cost me plus postage. The plates have no damage, marks etc, looks exactly like when Bob installed it.

Thanks for finding that link Claud :)

Cheers,
Sidds

-----------------------------------------------------

'99 Mitsubishi Pajero IO 5dr 1.8l manual (sold)

'97 Mitsubishi FTO GPX

'01 Kawasaki ZRX1200S (sold)

'15 Mitsubishi Challenger

--------------------------

GO-R

Online Status: Offline
Joined: 13/05/2012
Posts:

Post Number: #13
Post Date: Mon, 27/01/2014 - 10:16am

I am interested, just not

I am interested, just not sure how it will fit with the bullbar.

Well have to think about it.

1999 Pajero iO named Rex

shadowarrior

Online Status: Offline
Joined: 19/12/2012
Posts:

Post Number: #14
Post Date: Mon, 27/01/2014 - 10:34am

Hey mate, Check with

Hey mate,

Check with Bob/Claud, they can help you out with some tips.

Cheers,

Sidds

-----------------------------------------------------

'99 Mitsubishi Pajero IO 5dr 1.8l manual (sold)

'97 Mitsubishi FTO GPX

'01 Kawasaki ZRX1200S (sold)

'15 Mitsubishi Challenger

--------------------------

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #15
Post Date: Mon, 27/01/2014 - 7:43pm

bash plate

It may not be a straight bolt on and you may have to modify a bit the front or change the front fixation to the radius rod instead. How about you put a picture of the position of where it goes, with a picture we should be able to tell if your bull bar would be a problem or not....Unless Bob know...

One sure thing, not many of those around :)

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

bob_oz

Online Status: Offline
Joined: 31/03/2011
Posts:

Post Number: #16
Post Date: Mon, 27/01/2014 - 10:51pm

Bash plate tracing

Hey, did my letter with the bash plate stencil arrive? That would be the easiest way to check.
If you needed to trim the front edge a circular saw with an alu blade would do it in 30secs easy as. Postage would be around $30-$40

GO-R

Online Status: Offline
Joined: 13/05/2012
Posts:

Post Number: #17
Post Date: Mon, 27/01/2014 - 11:38pm

Yes it did arrive while I

Yes it did arrive while I have been on holidays. Thank you so much for that. When I get home I will be putting it on to see how it goes.

I should be home tomorrow or Wednesday to check.

Thank you again BOB_OZ!

1999 Pajero iO named Rex

shadowarrior

Online Status: Offline
Joined: 19/12/2012
Posts:

Post Number: #18
Post Date: Tue, 04/02/2014 - 9:26am

I have asked her to remove

I have asked her to remove the Gumtree ad, but the bash plate is still for sale. Ping me here if anyone is after one.

Cheers.

-----------------------------------------------------

'99 Mitsubishi Pajero IO 5dr 1.8l manual (sold)

'97 Mitsubishi FTO GPX

'01 Kawasaki ZRX1200S (sold)

'15 Mitsubishi Challenger

--------------------------

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #19
Post Date: Tue, 04/02/2014 - 10:48am

pajero io bash plate for sale

Just put a picture and details such as price, material, thickness here, if a new member look at it having all the info might help.

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

Bash plate for sale

bash plate ORDER one extra buyer needed

.

Bash plate

Bash plate

.

.

Any chance of getting another

another round of plates made up

bash plate

I'm really keen to have one

plate + bullbar

pajero io bash plate for sale

That looks like my bash

I am interested, just not

Hey mate, Check with

bash plate

Bash plate tracing

Yes it did arrive while I

I have asked her to remove

pajero io bash plate for sale

Syndicate

Translate This Site Into Your Language