Bash plate -
Mogas
PLEASE
May someone send me the DXF file for the bash plate.
I don't even have the standard bash plate on my IO and desparately need one where I drive in South Africa.
mogas at me.com
Thanks
Rick
mate emailing it to your
mogas@me.com
let me know if its the wrong email address
Hi,the file says no longer
Hi,the file says no longer exiting,could you please send the diagram to longmeri@gmail.com.many thanks ray.that price is so cheap,I do not think anyone will do it vic,so have to do it myself.
Seeent
Hi,the file says no longer exiting,could you please send the diagram to longmeri@gmail.com.many thanks ray.that price is so cheap,I do not think anyone will do it vic,so have to do it myself.
Sent to longmeri@gmail.com :)
big thanks,I just got my io
big thanks,I just got my io today,bought from auction,it going to be my first 4wd project,I am going to have this plate made in china,my dad know bit engineering things,and i am not in hurry,the great thing is I found chine have same model still prodction which as chang feng lie bao,they come with snorkel as well,I will find out if it will fit on io,coz I found here have no such parts,and it only cost 200 yuan(1 au dollar=5.5 yuan) plus postage,and also there few noob question,can I ask here or should I open another post.sorry for my broken english,hope guys could understand with bit imagination.btw I am from Melbourne.
Could someone please send the files to me?
Can't seem to find it on the site.
Cheers.
Hey guys, Is someone able to
Hey guys,
Is someone able to send me the pdf and/or the dxf?
Thanks!
Not able to download the files
Hi everybody. I got my Pinin without the bash plate and I really need it. Could you please send me the files to iulian.gutu@gmail.com?
Thank you!
bash plate design...thanks to Fab72
I have one of the PDF file for the bash plate design made and paid by Fab72. Fab72 and opted to share the design for us to use. I don't know how to upload a PDF file so I changed it to a picture, at least every one can print it and use it.
Happy io
bash plate bending
OK - not likely,
the bash plate will simply angle up more - if anything the mounting holes will be further appart as the angle is slightly longer.
note: the bends in the plate are an approx fitment - you can make it fit much better by putting some extra folds in it - check out B-E-N-C's plate as it has an extra two folds.
mine now has these folds too but as a result of smashing into lots of things >:D
DXF
Hi Guys
I am also from South Africa, and would like to know if anyone can send me the DXF file for the Bash Plate?
I am also currently looking into building and designing my own Drawer System for my 2006 Pajero 3.2DID LWB
and would gladly share my drawings when I'm done if anyone is interested.
I have also came across guys that have made their own replacement bumpers, so will probably investigate that as well.
Regards
Armand
Hi, we bought a 2002 LWB with
Hi, we bought a 2002 LWB with only 130k. Straight as!
Unfortunately has no bash plate, can someone please send me the template file?
Timodgers@hotmail.com
Thanks in advance
Will post pics
bash plate
Up to you mate! I was lucky enough to get on the run of 6mm or 7mm aliminum ones that were done a while back..
Can't speak for Ali VS Steel but mines had an absolute work out and at stages been a the only point of contact at the front and it's still straight with a few scratches.
If you intend to do more intense offroad I'd reccomend ali but then agian have no no experience with steel! $100 is cheap enough to give it a go I think!
Both have their pros & cons.
Steel is heavier, stronger & rusts; aluminum is lighter, less strong, so you need to use thicker plate, and rust is a non issue - aluminum is also softer and rocks will gouge it - whichever you choose, do not use checker or diamond plate.
bash plate
My plate is 5 mm thick (from memory) alloy and I have checker plate, I think that it look better than plain alloy and age a bit better as you don't see the mark as much. As above, I will add that alloy is more $$$ and that the noise when you hit a small rock is much nicer on alloy than steel.
Both will protect the car the same.
It's your car
Flat plate slides over rocks more easily than checker plate - but hey - it's your money, it's your car - that by the way is also one of the advantages of steel, it slides more easily than aluminum, the rocks gouge the softer aluminum, but slide aganst the steel.
Put a piece of checker plate down on sand and push it, put the same sized piece of flat plate down and push it - which one slides more freely - this can be the difference between getting bogged or making it through.
lol
Flat plate slides over rocks more easily than checker plate - but hey -
Put a piece of checker plate down on sand and push it, put the same sized piece of flat plate down and push it - which one slides more freely - this can be the difference between getting bogged or making it through.
Lol, spray it with silicon it will slide so much more...lol....
yes true but the difference won't get you stuck from one to the other. If anything the io insert will tend to stop you a bit more than the checker plate.
Anyway if a rock touch the front of the plate,..stopping might not be a bad option....
The very big advantage of steel is the cost.
Happy io
sorry to drag up an old
sorry to drag up an old thread but could someone please send me the dxf and pdf files, my shogun pinin (uk pajero io) has no underbody protection
many thanks
Edited by admin, deleted personnal detail.
could some one please send me
could do with the auto cad (dxf file) so i can get one of the machinests i work with to cut one out on our waterjet. i work for a fabrication company as a welder, i could draw it out by hand but on the cutter would be so much nicer
cheers though i have saved the photo above just in case
I had mine fabricated at Laws
I had mine fabricated at Laws Lasers in Brisbane.
They supplied the aluminium and did all the cutting and bending for $262 (with the stencil cutout). I think they outsourced the bending. Was a 4 day turn around if I remember right.
I just sent them the CAD file.
I'd really like the .dxf file
I'd really like the .dxf file if someone could send it to me.
Thanks!
PLEASE May someone send me
PLEASE
May someone send me the DXF file for the bash plate.
I don't even have the standard bash plate on my IO and desparately need one where I drive in South Africa.
mogas at me.com
Thanks
Rick