DIF LOCK

8 replies [Last post]

potilias

Online Status: Offline
Joined: 03/03/2018
Posts:

Post Date: Mon, 02/07/2018 - 7:15am

Hello im new member coming from a small country not that much experience in dif locker and i need your help guys. I have a 5 door Pajero io 4g93 engine 2004 model full time 4x4 and I want to know if it's possible to put dif locker ,ARB or TJM PRO or anything... Thanks in advance...

fordem

Online Status: Offline
Joined: 19/06/2011
Posts:

Post Number: #1
Post Date: Mon, 02/07/2018 - 9:13am

ARB should have a locker that fits the rear.

A couple of the forum members have fitted ARB air lockers to the rear, and a few others have also used Kaiser lockers from Brazil - search the forum using the key word locker and you should find a fair bit of information.

bob_oz

Online Status: Offline
Joined: 31/03/2011
Posts:

Post Number: #2
Post Date: Mon, 09/07/2018 - 9:26pm

YES

Yes - ARB make one for the rear - same as the Gen1 pajero rear diff center

I know of three io's with rear lockers so far (mine included)

ARB RD210

page 7 - https://www.arb.com.au/assets/air-lockers/application_chart.pdf

hands down the BEST modification i have ever done - it had the LARGEST improvement to offroad capability!

Pinin on the rocks

Online Status: Offline
Joined: 08/01/2013
Posts:

Post Number: #3
Post Date: Mon, 02/09/2019 - 10:25pm

It will only fit the GDi

It will only fit the GDi models though, not MPi

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #4
Post Date: Thu, 05/09/2019 - 10:15am

diff lock

Pinin on the rocks wrote:

It will only fit the GDi models though, not MPi

Mine and Bob were MPI engine and that diff lock fitted fine....

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

Pinin on the rocks

Online Status: Offline
Joined: 08/01/2013
Posts:

Post Number: #5
Post Date: Fri, 06/09/2019 - 1:12am

Maybe in AUS, in Europe all

Maybe in AUS, in Europe all MPi diffs are smaller and incompatible with GDi models, i have seen them open and compared in front of me, both front and rear

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #6
Post Date: Fri, 06/09/2019 - 10:59pm

diif

Interesting...and good to know! that car has many different type of difff, mitsubishi doesn't make it easy !!!

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

Pinin on the rocks

Online Status: Offline
Joined: 08/01/2013
Posts:

Post Number: #7
Post Date: Fri, 06/09/2019 - 11:28pm

All GDi models 1.8 & 2.0 have

All GDi models 1.8 & 2.0 have 7,25" front and 8" rear.

The MPi's i have seen in Europe must be 7" front and 7,25" rear. (not interchangeable)

mjheathcote

Online Status: Offline
Joined: 01/11/2018
Posts:

Post Number: #8
Post Date: Sun, 08/09/2019 - 7:19am

I think the Australian io's

I think the Australian io's (Pinins) are unusual having the super select transmission (and axles), but with Mpi engines due to the possibility of poor petrol availability not been compatible with the GDI engine.
Then again I believe 1.6 lt varients are also available, never sold in the UK, and maybe the EU also.

DIF LOCK

ARB should have a locker that fits the rear.

YES

It will only fit the GDi

diff lock

Maybe in AUS, in Europe all

diif

All GDi models 1.8 & 2.0 have

I think the Australian io's

Syndicate

Translate This Site Into Your Language