Pajero io ZR wrecking
Check this add in Gumtree
Manual 2002 ZR 2 doors wrecking, body have been rolled, rear bumper and passager door ok. Most mechanical are still there but the transfer case and front diff....
Gear box and engine are available
http://www.gumtree.com.au/s-ad/city/cars-vans-utes/2002-mitsubishi-pajer...
EDIT ADD REMOVED. Let me know if you need something. Gearbox is sold and while the engine is running very well, I suspect a blown head gasket.
parts
I have a gear box from a 2 litre engine, I am keeping the transfer case. While I am not 100 % sure that you can fit it on your car (I haven't done this swap myself). Most people think that it is a no problem, you will have to put your transfer case on it.
For your lift, if you buy the gear box, I will give you some spring for the rear of you io, from the mazda astina (used by many, me included) and I will make some spacer for your front strut. (again, same as mine that are on my car). That should give you around 45 mm lift.
Do you have a 2 doors or a 4 doors ?
I haven't decided on the price of the gear box, I will call the wrecker and will lower the price. Open to offer if you wish.
Happy io
That sounds great thank you,
That sounds great thank you, if you can let me know how much I would really appreciate it. Let me know how much for the gear box.
I have the four door one, it is agreat little 4x4 and I am really impressed so far wth its capabilities. We have been on a few tracs here in melbourne, but I have avoided the rally muddy tracks asit is too low.
Kind regads
Neil
pajero io wrecking
The gearbox is sold...Thanks Neil...
I tested the engine last week and found that it may have a blown head gasket (blowing white smoke when warm, water going in the cylinder I guess), I don't want to bother to repair it, and I don't need it, at the moment anyway.
Happy io
Pajero io zr wrecking dismantling
I have been busy dismantling the rolled ZR. As I sold my engine crane a few years back, I decided to drop the complete front (engine, diff, steering, cross member suspension....), and lift the body instead. I just removed the all lot...and happy about it !
Happy io
A few pics
air cond line
I haven't done much on this car since my last post. But yes, I kept that line. As I have the extractors, I know exactly what you mean :)
You mentioned in another thread that you might weld it, I think that it is the rubber section that burned, not the alloy one...is it ?
$30 + freight
Happy io
!!!
I haven't done much on this car since my last post. But yes, I kept that line. As I have the extractors, I know exactly what you mean :)
You mentioned in another thread that you might weld it, I think that it is the rubber section that burned, not the alloy one...is it ?
$30 + freight
Happy io
Mate where are you located!!?? I think you know the line I mean ;)
Regardless I have pictures that I would love to email yourself if interested in parting with it? I imagine you'd wanna keep it a spare as you are a fellow upgraded extractor IO owner ;)
clear out
If I make a couple more sell, good but I am not in a rush or care that much at all !! it is only advertised here (for now anyway). It was mostly to have a good stock of parts for me. A couple of month ago, the day before a long week end trip my CV boot got busted....fixed in 1 hour :)
You can have the seat , $10 each and $2000 for freight, how would you like to pay....lol....
Happy io
Spare bashplate/under gaurd
Hi Claude,
Bit of a long shot but do you still have the bash plate/under gaurd for the ZR. I bought a 02 io SWB a couple of weeks ago the cover is missing (from front bumper and covers sump area). Before I go offroad or on beach I think I should get something to stop damage. Don't quite have the money to get something as awesome as the metal bash plate you and a few others have at the moment.
Cheers
Ben
bash plate
Welcome to the forum,
Yes, I do have the bash plate but the freight cost doesn't make it a good option. I checked Australia post parcel calculator and it comes up well over $100, mainly because of the size.
You still should be able to go out, but with some extra care.
If you want a cheap bash plate, a visit to the metal recycling to get a steel metal plate that you could cut with an angle grinder shouldn't cost you too much. I have posted the schematic of the plate here, post 72.
http://pajerio.com/forum/bash-plate?page=1
Another option is your local wrecker.
Sorry....
Happy io
postage
would you be happy to post some items for me?
it is located in ACT
.