Pajero pinin 01 3door from sweden!

5 replies [Last post]

renthal

Online Status: Offline
Joined: 30/08/2017
Posts:

Post Date: Tue, 08/09/2020 - 2:53pm

Got my self a pinin 3door-01 2.0gdi ! its awsome i will start post pic of the build to offroad for me and my kids ,

had a 5door pinin but sold that a few years ago,

if any one got a good site in eu for liftkit please let me know !

do some one got dwg print for a front winch bumper ?

what to do.

Liftkit

rockslides

front winch bumper

rear bumper

roofrack

new shoes for it

snorkel

Best regard Robert !

fordem

Online Status: Offline
Joined: 19/06/2011
Posts:

Post Number: #1
Post Date: Tue, 08/09/2020 - 10:20pm

Welcome.

Welcome - I suspect for a lift kit you might need to get it on ebay, out of Australia - the big challenge is suitable struts, check and see what you have in front (part number should be stamped in), if you're lucky you can get Koni inserts that'll fit.

Check the lift & strut data threads for more details.

Adrian9912

Online Status: Offline
Joined: 26/10/2019
Posts:

Post Number: #2
Post Date: Fri, 11/09/2020 - 7:25pm

Welcome to the forum. In

Welcome to the forum.

In Australia the Pinin (we call it the IO) was not overly common and the market for after market parts is a bit small. There is a lot of info around the forum for what springs and shocks are good to use though, so putting together your own kit might be easier.

pebre

Online Status: Offline
Joined: 30/10/2018
Posts:

Post Number: #3
Post Date: Mon, 28/12/2020 - 4:57am

To achieve a rise of 40 or 50

To achieve a rise of 40 or 50 mm, a set of shims or the replacement of the springs is sufficient at a very reasonable cost.

The original shock absorbers can be kept.

Game can give part references if needed.

Calle

Online Status: Offline
Joined: 31/01/2021
Posts:

Post Number: #4
Post Date: Sun, 31/01/2021 - 9:09pm

Lift

renthal wrote:

Got my self a pinin 3door-01 2.0gdi ! its awsome i will start post pic of the build to offroad for me and my kids ,

had a 5door pinin but sold that a few years ago,

if any one got a good site in eu for liftkit please let me know !

do some one got dwg print for a front winch bumper ?

what to do.

Liftkit

rockslides

front winch bumper

rear bumper

roofrack

new shoes for it

snorkel

Best regard Robert !

Hello fellow Swede

I Saw your post and I have a tip for your lift . I found a fora in Sweden and I bought suspensions springs from a Nissan sunny and shockers from L200. That lifted my rear 2” it was a cheap solution. For front lift I used struts.

I’m also looking for a winch bumper but I can’t find any. So please post if you find any.

Attaching the parts number for the rear lift. If you PM me I can explain in Swedish.

Calle

Online Status: Offline
Joined: 31/01/2021
Posts:

Post Number: #5
Post Date: Sun, 31/01/2021 - 9:15pm

I bought it from

I bought it from skruvat.se
Antal Rest Benämning ProduktId à pris Radtotal
2 0 Stötdämpare, Bakaxel 35132 365,00 kr 730,00 kr
2 0 Spiralfjäder, Framaxel 1037253 559,00 kr 1 118,00 kr

You should use these parts to your rear lift. Even though it’s is front springs.