Pinin in Wales

1 reply [Last post]
Jafco4x4
Jafco4x4's picture
  • Online Status: Offline
  • Joined: 23/01/2017
  • Posts:

Recently just bought a 2005 pinin

Trying to find any where around here is impossible for parts or a decent mechanic.
The plan Is to fit the KYB strut keeping the existing spring due to lower pan I have got. Will this lift 25mm?
If so can I use a 25mm strut spacer to get me to 50mm lift. The Mazda springs for the rear will I need to change shocks
And how much will this give lift?
Will this effect the pan hard if so how can I overcome This.
Looking at getting a snorkel as well seen some guys used ones but what ones can fit the little pinin?
Will 16x7 et30 rims fit with out spacers or will I need spacers still?

Last thing is there anyone around the Swansea area Wales U.K.?

Rustypinin
  • Online Status: Offline
  • Joined: 19/05/2016
  • Posts:
  • Post Number: #1
Hiya,  I doubt there are many

Hiya, 

I doubt there are many pinin fans on here in the uk, let alone Wales.

You're right in that probably you will have to do it yourself, with a steep learning curve.

Get a note pad and read through the site. 

Ps bear in mind after all the mods it will drive worse on road and not be worth more money. But we all do it anyway. And it looks good! There is a company that does Toyota hi-lux bits in the uk advertising a lift kit. Maybe in  Surrey...

Syndicate

Syndicate content

Translate This Site Into Your Language