centre lock light sequence
I dont have a manual and dont have enough memory on my laptop to download it (hopefully have that sorted soon)
2WD - Rear green solid
AWD - All 4 green solid
4WD - All 4 green solid and centre flash orange
4WD Low range - All 4 green solid and (here is my question) should the centre now be solid orange or flash?? Mine flashes but Physically works fine, tipping a switch/wiring issue.
(recently fixed a 'flickering' centre light when in 2 and Awd, this was a 'dicky' switch, easy fix with a cleanout. Will i find the same joy with cleaning the offending switch here or am i looking for a problem thats not a problem ;p
Ok, so any hints on what
Ok, so any hints on what switch i am looking for? The one i 'fixed' was second from the front of the transfer case facing straight up. It was clearly sticking and once 'flushed out' with WD40 it now works. The one next to it is brand new so guessing its not that one.
My mates larger Paj, around the same year is different,
2 and 4 same as mine/IO
4wd high: all solid green and solid orange
4wd low: all green flash and orange solid.
I thought all super select would be the same. silly.
Thanks
Syndicate
.
If the light is flashing it is because it's telling you that it is not engaged. At least a switch say so ! My bet is that the switch that you fixed is not working again and still think that you are not engaged (not you the 4wd :)). The inside connections are very very small bit of copper.
Happy io
My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io