help

5 replies [Last post]

harry2012

Online Status: Offline
Joined: 05/11/2013
Posts:

Post Date: Tue, 26/11/2013 - 5:50pm

can not buy the senor plate and washer that sits behind the timing pulley on the crankshalf of my 1.6ltr IO. Mitish. can not help and are saying not even avaliable in japan?

Any help welcome as my IO is dead without it

Regards

Neil

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #1
Post Date: Tue, 26/11/2013 - 6:35pm

parts needed

Do you have a reference number for this parts. May be Mitsubishi can give you the part number. Once you have the part number try this site http://www.amayama.com/search/?q=MR417798

I have already use it and some parts are a lot cheaper and may supply some parts that are not available else where....

Let us know how you go....and good luck.

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

Ben3132

Online Status: Offline
Joined: 05/12/2012
Posts:

Post Number: #2
Post Date: Tue, 26/11/2013 - 7:28pm

Evening Claude. You've bought

Evening Claude. You've bought parts of that site yes? Did you use PayPal? Looked at site plenty of times but thought it was a reference site for part numbers. Wasn't aware you could purchase from it.

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #3
Post Date: Wed, 27/11/2013 - 7:31am

yes...

Yes I used PayPal, but I think that you can use credit card too. You have to register first, then choose what you need and make a pre-order then they send you an email to confirm or not if they have the parts with the total cost (freight included), then you pay or not....it say that it can take up to 6 weeks to get the parts but in my case it was at my door in 2 weeks. Switches for the transfer case are....$20 each, Mitsubishi $90!!! not that all parts are that much cheaper....

Their site is link to a search parts number where you can enter your chassis number but there isn't a schematic, you need to know the correct name and properly choose your parts.

Someone else did mention this site.....

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

bob_oz

Online Status: Offline
Joined: 31/03/2011
Posts:

Post Number: #4
Post Date: Wed, 27/11/2013 - 9:48am

http://www.auto-parts.spb.ru/cat/mi/mi2.mycat

is in russian but great pictures!!

singlecell

Online Status: Offline
Joined: 06/07/2011
Posts:

Post Number: #5
Post Date: Thu, 28/11/2013 - 7:23am

proton

Also try Proton suppliers as the 4g18 is used in the Proton Waga, Email car part places in Malaysa, they were able to supply all sorts of stuff for my 1.6L engine that noone in Australia could.

This is who I used, http://www.presidentace.com/ I found the prices were just amazing, I remember buying four piston rods for less then one here in Australia. Even if its not listed on the site email him. Other mobs I contacted you could see they had bumped up their prices since i was enquiring from overseas.