Lift-kits, coilovers, strong front arm - Pajero Mini/JR/iO/Pinin

32 replies [Last post]

M0nster

Online Status: Offline
Joined: 10/07/2014
Posts:

Post Date: Thu, 10/07/2014 - 5:15am

Hi, my workshop manufactures lift kits and suspension elements for the Pero Mini, Junor, iO, Pinin. Actual prices and products you will find on my site. If you have questions regarding the delivery and purchase, please contact us by email.

e-mail r.korovin@gmail.com

www.m0nster.ru

Lift-kit

Front arm

Coilovers

turbostar3000

Online Status: Offline
Joined: 17/09/2014
Posts:

Post Number: #1
Post Date: Fri, 19/09/2014 - 2:45am

Hi, i need a lift kit for the

Hi, i need a lift kit for the 2000 Pajero io

The 3 door one in the picture

Do you make that or can make that?

M0nster

Online Status: Offline
Joined: 10/07/2014
Posts:

Post Number: #2
Post Date: Wed, 29/10/2014 - 6:43pm

Yes, i made a few kit for iO

Yes, i made a few kit for iO \ Pinin but the cost is higher because lift-kit for iO includes monotube shock absorbers, like Rancho series rs5000. Price for 50mm lift kit 650 USD.

M0nster

Online Status: Offline
Joined: 10/07/2014
Posts:

Post Number: #3
Post Date: Sat, 14/02/2015 - 2:36am

While our crazy President

While our crazy President captures neighboring countries, and we have economic crisis in this time. You have good news, the national currency, much cheaper and the price in dollars is now 320USD!

Jas58

Online Status: Offline
Joined: 11/11/2015
Posts:

Post Number: #4
Post Date: Thu, 12/11/2015 - 8:39pm

mitsubishi pajero io 2000 50mm lift kit

hey there. just want to know more about them cause im thinking off doing a 50mm off lift on my pajero io. and where can i bye one and all that

2000 pajero io 5 door

M0nster

Online Status: Offline
Joined: 10/07/2014
Posts:

Post Number: #5
Post Date: Thu, 12/11/2015 - 9:17pm

Hi, you can buy from me for

Hi, you can buy from me for 350USD full kit for lift iO to 50mm. Сomposition is similar to that set for the mini/jr but due to the large size of the individual elements are differently.

befor

after

Jas58

Online Status: Offline
Joined: 11/11/2015
Posts:

Post Number: #6
Post Date: Fri, 13/11/2015 - 12:48pm

lift

Can you post it

2000 pajero io 5 door

M0nster

Online Status: Offline
Joined: 10/07/2014
Posts:

Post Number: #7
Post Date: Fri, 13/11/2015 - 6:50pm

it does`t matter because Io

it does`t matter because Io and Pinin is absolutely identical except for the position of the steering wheel and a few decorative elements

plummer

Online Status: Offline
Joined: 19/09/2014
Posts:

Post Number: #8
Post Date: Sat, 14/11/2015 - 11:19am

20mm spacers

Hi, I would be interested in a pair of 20mm spacers for front and back if you can do.
Thank you!

Life shrinks or expands in proportion to one's own courage

Quontom

Online Status: Offline
Joined: 08/09/2015
Posts:

Post Number: #9
Post Date: Sat, 28/11/2015 - 9:05pm

thats only $500 austrailian

thats only $500 austrailian thats a great deal for us but how much would it cost to get to australia?

red_daug

Online Status: Offline
Joined: 02/09/2012
Posts:

Post Number: #10
Post Date: Sun, 29/11/2015 - 9:34am

Lift Kit

Hey

Do you make for the 4 door iO - H76W and how much would it be to ship to Barbados in the Caribbean?

M0nster

Online Status: Offline
Joined: 10/07/2014
Posts:

Post Number: #11
Post Date: Sun, 29/11/2015 - 4:55pm

Shiping to Barbados via EMS

Shiping to Barbados via EMS International Express Mail service with tracking - 12 bussines days 163USD

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #12
Post Date: Sun, 29/11/2015 - 7:09pm

pajero io lift kit

What does your kit included ? Do you have some pics ?

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

plummer

Online Status: Offline
Joined: 19/09/2014
Posts:

Post Number: #13
Post Date: Fri, 04/12/2015 - 5:24am

Lift kit pictures

If you have some pictures with what is included in the kit, would be really appreciate.

Life shrinks or expands in proportion to one's own courage

M0nster

Online Status: Offline
Joined: 10/07/2014
Posts:

Post Number: #14
Post Date: Wed, 23/12/2015 - 12:52am

Full kit +50mm with

Full kit +50mm with coilover shocks (based on Koni cartidges) my factory production. Price for all -1000USD

Quontom

Online Status: Offline
Joined: 08/09/2015
Posts:

Post Number: #15
Post Date: Wed, 23/12/2015 - 1:50am

those coil overs would

those coil overs would completely eiminate the problem of tyres hitting the strut pan but then again when i hit my sturt pan with big tyres i can only get about 10 deg of stearing due to it hitting my wheel arch

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #16
Post Date: Wed, 23/12/2015 - 8:18am

pictures

Thanks for the pictures, it is a lot for $500, no way you can get all that for this amount here.

It is good that you gave some pics as the car showed in post 7 have a different lift kit : it doesn't have the coil over and it does have spacer on the radius rod.

What would be added cost to freight for Australia ?

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

M0nster

Online Status: Offline
Joined: 10/07/2014
Posts:

Post Number: #17
Post Date: Wed, 23/12/2015 - 9:33pm

Without coilovers price which

Without coilovers price which as I said is 350USD, shipping to Australia 171USD (EMS with tracking)

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #18
Post Date: Thu, 24/12/2015 - 8:27am

hum

Yes you said 350usd but that wasn't my question.

You mentioned one type of lift kit without the coil over (picture in post 8 clearly show the strut, no coil over here). We asked you for a picture of the lift kit showed in your post 8, and you gave us a picture of another lift kit with coil over ( in your post 14) .

So yes the kit without coil over is 350usd, so for that price what is included instead of the coil over ? again a picture of that kit will be nice.

And what is the price of the other kit, in picture post 14, coil over and freight included ?

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

M0nster

Online Status: Offline
Joined: 10/07/2014
Posts:

Post Number: #19
Post Date: Thu, 24/12/2015 - 3:27pm

Coilovers have a length of a

Coilovers have a length of a standard rack in and of themselves do not give a lift, due to changes in preload can definitely get a little lift (30mm max) but it will be due to reduction of stroke damping on the rebound, which is not good. Lift is done by using spacers including under-shocks (spacers under the red springs). Thus, the lift kit that you are interested in is all that is in the photo except coilover.

On photos that I had previously published used only a lift kit. The owner went a long time with a lift of 30 Inch wheels. Coilover on this vehicle were installed later to install 33inch tyres.

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #20
Post Date: Thu, 24/12/2015 - 5:54pm

thanks

Thanks for clearing this up. I just noticed that the last part of your post 14, mentioning the price, was not visible because of the "delete edit reply quote" sign at the lower right. I will correct this for you. This will stop some possible confusion.

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

s973s

Online Status: Offline
Joined: 21/03/2016
Posts:

Post Number: #21
Post Date: Wed, 23/03/2016 - 8:31am

Help

Can u plz tell me which other cars shock absorbers fit to pajero io 2003 5door
Like can i fit hilux, rav4 etc shock absorbers

plummer

Online Status: Offline
Joined: 19/09/2014
Posts:

Post Number: #22
Post Date: Mon, 28/12/2015 - 5:37am

Steering shaft welding

Hi,

Please help me with a picture to understand how it's extended the steering shaft. In the pictures presenting the Pinin from the back I can see how the panhard bracket was moved but the steering shaft I kinda have no idea. And the full kit, including koni struts with coilovers it's very appealing...
Could you also give me a quote for shipping to London?

Thank you and Merry Christmas!

Life shrinks or expands in proportion to one's own courage

terryphelan

Online Status: Offline
Joined: 06/10/2016
Posts:

Post Number: #23
Post Date: Thu, 06/10/2016 - 7:49am

Lift Kit

Hi,

Newbie here...

Just wondering a) if these kits are still available and b) did anyone buy one?

Thanks, appreciate your help

hilslamer

Online Status: Offline
Joined: 24/05/2017
Posts:

Post Number: #24
Post Date: Wed, 24/05/2017 - 4:34pm

Another potential buyer...

terryphelan wrote:

Hi,

Newbie here...

Just wondering a) if these kits are still available and b) did anyone buy one?

Thanks, appreciate your help

Me too, +1. I have emailed the address from the OP with no reply...

fjgomes79

Online Status: Offline
Joined: 16/08/2017
Posts:

Post Number: #25
Post Date: Fri, 18/08/2017 - 10:57pm

Hello I have a Pinin 2.0 GDI

Hello

I have a Pinin 2.0 GDI 5 door.

I would like to raise it by 30/35 mm.

What would be necessary for that?

Could you make a set for that and what would the cost be?

Thanks

Pajero Pinin 2.0 GDI, 5 door (H77W)

Claude io

Online Status: Offline
Joined: 11/10/2011
Posts:

Post Number: #26
Post Date: Sat, 19/08/2017 - 8:02pm

MOnster

fjgomes79 wrote:

Hello

I have a Pinin 2.0 GDI 5 door.

I would like to raise it by 30/35 mm.

What would be necessary for that?

Could you make a set for that and what would the cost be?

Thanks

MOnster have not been log in since 1 year and 34 weeks....I am not sure that he is still around to reply....

Happy io (also admin helper)

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io

higor camargo

Online Status: Offline
Joined: 09/09/2020
Posts:

Post Number: #27
Post Date: Wed, 09/09/2020 - 1:07am

wich spring you use on front

wich spring you use on front coilover kit?

Pajerokidjr

Online Status: Offline
Joined: 05/04/2021
Posts:

Post Number: #28
Post Date: Mon, 05/04/2021 - 10:23am

Suspension Assistance/Recommedations for Pajero Jr. (1996)

Hi, good day to everyone and I trust this will be a fruitful experience for me. I recently purchased a 1996 Pajero Jr. which is often referred to as a Pajero mini and I have a set of 18-inch rims with a set of 245/60/18 tires along with 2-inch wheel spacers. My predicament is that it fits but a full lock is close to impossible. I am seeking your guidance as to how I may obtain an adequate lift, process to acquire and cost to facilitate this. I have attached two photos, one showing a generic picture of the vehicle (from the internet) and the second is the actual vehicle with the wheels onto it.

Thank you in advance, sincerely.

kdasc

Online Status: Offline
Joined: 17/06/2021
Posts:

Post Number: #29
Post Date: Fri, 23/07/2021 - 12:57pm

Help me!!!

HEY GUYS

I NEED YOUR HELP!

I live in a region where pajero mini/jr are very rare and uncommon. I have own a pajero for a min now.

That means all my suspension parts are extremely worn out lol. I am having a very difficult time sourcing control arms and coilovers/suspension kit for the pajero mini at a reasonable cost.

Can someone direct me to a website where i can get these parts for cheap.

I want to bring my pajero mini back to life!!

kDasc

fordem

Online Status: Offline
Joined: 19/06/2011
Posts:

Post Number: #30
Post Date: Sun, 25/07/2021 - 12:34am

.

Please be aware that the Pajero Jr and the Pajero Mini are different vehicles - for OEM replacement parts you can try megazip.net or amayama.com - and don't expect cheap.

You should be able to enter the vehicle frame number and get to the correct parts catalog.

Wian316

Online Status: Offline
Joined: 27/03/2024
Posts:

Post Number: #31
Post Date: Wed, 27/03/2024 - 2:15am

Hi, guys I am looking for a

Hi, guys I am looking for a full lift kit and suspension upgrade can anyone help? Pajero io 3 door 1998

fordem

Online Status: Offline
Joined: 19/06/2011
Posts:

Post Number: #32
Post Date: Wed, 27/03/2024 - 4:36am

There is a ton of information in the forum

Go into the suspension section of the forum and start reading - YOU have to figure out what you have and what you want to achieve before we can help you with anything suspension related.

Lift-kits, coilovers, strong front arm - Pajero Mini/JR/iO/Pinin

Hi, i need a lift kit for the

Yes, i made a few kit for iO

While our crazy President

mitsubishi pajero io 2000 50mm lift kit

Hi, you can buy from me for

lift

it does`t matter because Io

20mm spacers

thats only $500 austrailian

Lift Kit

Shiping to Barbados via EMS

pajero io lift kit

Lift kit pictures

Full kit +50mm with

those coil overs would

pictures

Without coilovers price which

hum

Coilovers have a length of a

thanks

Help

Steering shaft welding

Lift Kit

Another potential buyer...

Hello I have a Pinin 2.0 GDI

MOnster

wich spring you use on front

Suspension Assistance/Recommedations for Pajero Jr. (1996)

Help me!!!

.

Hi, guys I am looking for a

There is a ton of information in the forum

Syndicate

Translate This Site Into Your Language