Oil pressure switch location 4G93 MPI

4 replies [Last post]
Paolo5
  • Online Status: Offline
  • Joined: 30/06/2013
  • Posts:

Hi,

The dash oil light on my partner's iO does not light up with the other warning lights when the ignition is turned to its first notch.

 

I would like to replace the oil pressure switch.

 

Can anyone tell me its location (or send a photo) on a 4G93 MPI engine?

 

Thanks,

Paolo

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #1
pressure switch

It is 2 cm away from the top section of the oil filter. Might also be worth checking the bulb on the dashboard.

Happy io

Paolo5
  • Online Status: Offline
  • Joined: 30/06/2013
  • Posts:
  • Post Number: #2
Thanks, Claude!

Hi Claude,

Thanks for this information. I thought that I would ask first before looking near the oil filter (and removing the bashplate..... again...)

 

I will put in a new switch first and see if that gets it to work...the dash light globe is step 2 (if needed).

 

Best regards,

Paolo

Paolo5
  • Online Status: Offline
  • Joined: 30/06/2013
  • Posts:
  • Post Number: #3
Step 1 worked...

Thanks again, Claude!

I just needed to cut off the existing connector of the iO harness and crimp a female spade connector on to connect to the new switch.

 

All good....

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #4
well done

Very well done yes

Happy io

Syndicate

Syndicate content

Translate This Site Into Your Language