Tiny Rick

4 replies [Last post]
metalfanmartin
metalfanmartin's picture
  • Online Status: Offline
  • Joined: 08/06/2017
  • Posts:

 

This is my new car!
2001 iO with 155,000k's on the clock.

Everything is pretty stock, besides putting a new head unit in it.
Any suggestions on how to make it look a bit more tough? I will be changing the rims sometime.

It runs really nice. I've ordered a timing belt kit which I will be putting in this weekend or next. Not sure how I'll go :--O

simmo777
simmo777's picture
  • Online Status: Offline
  • Joined: 01/11/2012
  • Posts:
  • Post Number: #1
hey tiny rick

You have a nice looking low km's IO very nice! Is tiny rick a reference to that rick and morty episode? 

We have the same bullbar by the looks of it, except yours is missing the scratches ;) 

I have muddies on a set of Mazda tribute rims 16x7 that look alright I think and a few other guys here run suzuki variants etc You'll need to chase 5 stud x 114.3 rims in a 16x6.5 or 16x7 (unsure of offsets) that I can confirm fit, other members may be able to tell you more!

Throw a bit of lift in and aggressive tread and you will be halfway there!

2002 5dr Pajero IO QA 2.0L Auto - Lifted, Locked!! 1.925 Low Range - Muddies (205/80/16) - Redback Extractors to 200cell cat to dump at diff Exhaust 

bob_oz
bob_oz's picture
  • Online Status: Offline
  • Joined: 31/03/2011
  • Posts:
  • Post Number: #2
offsets

i'd aim for a 6.5" wide by 38 offset, or 7" by 32-35 offset.

I run 6.5" -38 and the inside lip is in the same position as stock - run 1/2" wider outwards

.

metalfanmartin
metalfanmartin's picture
  • Online Status: Offline
  • Joined: 08/06/2017
  • Posts:
  • Post Number: #3
Wabbalubba

simmo777 wrote:

You have a nice looking low km's IO very nice! Is tiny rick a reference to that rick and morty episode?

You betta believe it mate! Fantastic show, one of my favs.
Thanks for your tips mate.

bob_oz wrote:

i'd aim for a 6.5" wide by 38 offset, or 7" by 32-35 offset.

I run 6.5" -38 and the inside lip is in the same position as stock - run 1/2" wider outwards

Thanks Bob! I literally just put these tyres on haha, so I won't be changing then until they're due. But thanks for the input.

metalfanmartin
metalfanmartin's picture
  • Online Status: Offline
  • Joined: 08/06/2017
  • Posts:
  • Post Number: #4
Went camping with Tiny Rick

Went camping with Tiny Rick to a nice campsite near D'Aguilar national park in QLD.

Didn't get to do any 4wding or anything, was just a nice relaxing time with my wife and our two pooches (one is pictured below)

 

 

Syndicate

Syndicate content

Translate This Site Into Your Language