Bullbar / Nudge Bar
bb
Surely someone still makes them? If your happy with my design, I can give you the plans to make one up, or have one made up if you like?
I have changed it a little since the first post, Ill post some update pics of the plans tonight or tomorrow at some point.
Glen,
Did you make one for yourself?
??
Surely someone still makes them? If your happy with my design, I can give you the plans to make one up, or have one made up if you like?
I have changed it a little since the first post, Ill post some update pics of the plans tonight or tomorrow at some point.
i wanna know too. i would love it6 if you could make one up for myself. i dont have the resources to do so
Hi. I am after the front
Hi.
I am after the front bumper for a IO 1999.
Any thoughts?
I am in QLD...
Cheers!
Bar on ebay right now
There is a loop bar for the io on ebay right now. It doesn't come with the vehicle mounts though. The seller lists the mounts being approx 1m appart but the io chasis is 900mm wide. I was tempted to buy and make some brackets but it is in sydney. Ebay search for pajero io brings it up.
"Dear scott266richardson,
Hi, do you know the manufacturer of the bar? Reason I ask is that the chasis of an io is 900mm across so there would be some vehicle mounts required between the bar and the car
Thanks -
Dear bob,
Hi Bob,
There are no markings on the bar to indicate what brand it is sorry. Please let me know if I can take any more measurements to assist.
Scott"
http://www.ebay.com.au/itm/170720223603?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Sorry guys, i missed the
Sorry guys, i missed the replies asking about me making some,
It is still on the cards, I just dont have the time right now/
Im happy to share my design if you can find someone to make it?
We have almost finished moving into the new warehouse and are setup again so I might be free to play again soon :)
bbar
could you please send me youre plans or re-post them mate?
cheers
I have them up in one of my threads somewhere do a quick search.. Im going to finish my design with winch integration when i get a chance.
I have also been reading up on ADR standards and see no reason I can not make mine pass, there is no call for actual crash testing, and i do FEA for a living, so should be able to do all the testing needed to make them pass, and probably will do just for my own use in order to be legal .
Surely someone still makes
Surely someone still makes them? If your happy with my design, I can give you the plans to make one up, or have one made up if you like?
I have changed it a little since the first post, Ill post some update pics of the plans tonight or tomorrow at some point.
Yippy i-O
31s 245/75/16 BFGs(33s next) 5" lift Coilovers with 290mm stroke. - 5.29 diffs with Kaiser Lockers.