Broke my Timimg Belt - Need advice

3 replies [Last post]
Ben Johns
  • Online Status: Offline
  • Joined: 23/05/2016
  • Posts:
  • Post Date: Mon, 23/05/2016 - 5:37pm

Hi all - just picked up an io beauty but day 7  boke the timimg belt.

Any advice or pointers on DIY replacement..?

Claude io
Claude io's picture
  • Online Status: Offline
  • Joined: 11/10/2011
  • Posts:
  • Post Number: #1
  • Post Date: Mon, 23/05/2016 - 6:44pm
timing belt

Welcome to the forum

This should help to put a new belt but you may have internal engine/head damages.

Where are you from ?

http://pajerio.com/forum/diy-timing-belt-4g94

Happy io

My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io 

Ben Johns
  • Online Status: Offline
  • Joined: 23/05/2016
  • Posts:
  • Post Number: #2
  • Post Date: Mon, 23/05/2016 - 9:02pm
Thanks mate- from Adelaide

Thanks mate- from Adelaide Australia

bob_oz
bob_oz's picture
  • Online Status: Offline
  • Joined: 31/03/2011
  • Posts:
  • Post Number: #3
  • Post Date: Sat, 11/06/2016 - 11:36pm
Likely got a few buggered

Likely got a few buggered valves.

put a new belt on it, see if it runs and do a compression test - if it is low you can assume valves on that cylinder are cactus so pull head.

bottom end and pistons very likely fine.

welcome!!

.

Syndicate

Syndicate content

Translate This Site Into Your Language