EXTRACTORS on a 1.8ltt

3 replies [Last post]

Alexio

Online Status: Offline
Joined: 20/05/2011
Posts:

Post Date: Tue, 11/10/2011 - 10:32pm

cant find any extractors to fit the 1.8lt but have found the wildcat ones for the 2.0lt and just wondering if they could still work on the 1.8lt

Alexio

Online Status: Offline
Joined: 20/05/2011
Posts:

Post Number: #1
Post Date: Thu, 13/10/2011 - 2:19am

just realised that i should

just realised that i should of been searching for lancer ones as its the same motor (4g93) and i found pacemaker ones had the best read up, any info on them?

fordem

Online Status: Offline
Joined: 19/06/2011
Posts:

Post Number: #2
Post Date: Sat, 15/10/2011 - 8:47am

Probably won't fit - but take a look anyway.

Two things to be aware of ...

First - the Lancer is a transverse engined car - the header is basically a C shaped piece of pipe - with the flange at the top and turning to pass under the oil pan - the header tubes are essentially at right angles to the flange, wheras the iO has a longitudinally mounted engine so the tubes will run parallel to the flange.

Even if it does bolt-on - expect to have to do some custom pipe work.

Second - I have been told that there are different versions of the 4G93 engine - some of which have the ports on the opposite side of the head - it may not fit at all - have a look at this thread - http://www.pajerio.com/forum/piston-and-conrod-replacement

Alexio

Online Status: Offline
Joined: 20/05/2011
Posts:

Post Number: #3
Post Date: Sat, 15/10/2011 - 10:06pm

ahhh thanks for the good

ahhh thanks for the good info, im just trying to get a bit more power of the little io

EXTRACTORS on a 1.8ltt

just realised that i should

Probably won't fit - but take a look anyway.

ahhh thanks for the good

Syndicate

Translate This Site Into Your Language