Standard IO height
Hello guys, the other night i thiught it might be a good idea to get standard heights on the io again just to see where im standing with my lift, for some other reason i lost the measurements. is there any body that still has a stock std io that can do some measurements for me please? I need the distance from the centre (or top of the centre cap) to ithe inside of the wheel arch? At long last i ot my new coils fitted but i want to be sure of what my total lift is before i update my details of mods? Hope someone can help
measurement
Yes correct, bottom of the rim through the center of it, Fordem's idea, easy and precise, (if you have the same rim...) but if you have different rim try this one, I just typed "center" to the search and found it! http://www.pajerio.com/forum/ebss-io reply 11, I can recheck mine again, center to guard and let you know tomorrow if you need.
Happy io
Ok went and measured mine now
Ok went and measured mine now and have both measurements from two different point (FYI)
From the centre cap - Front 470mm , Rear 500 (Busy with spacer to plain the car out in the front)
From the bottom of the rim - Front 710, Rear 740.
This was just a general question I asked for my info only. Seems the std height from the centre cap is +-425mm giving me a max lift of 75mm. WOHAAAA!!!
Step by step its becoming a monster truck!!!!
measurement
Check here http://www.pajerio.com/forum/negative-camber-front-wheels see post 6, see post 5 for the point of measurement. I haven't touch the suspension...yet...
Happy io
My io is now SOLD Thankshttp://pajerio.com/forum/claudes-io-2002-zr-built-thread-onlyhappy-io