water on passenger floor -
Mornig,
i have porblem like on Topic, yestreday i smeel something from passanger floor so i decide to demount passanger seat
and when I lifted the carpet - there was alot of water .. so today i start the drying process.
Strange - cause this happens 1'st time. during normal driving in the heavy rain.
the floor is a healthy, mudguard the same - maybe there are some standard places where should i check.
I have a plan to dry all, then poured the water under high pressure by pressure washer.
ps. seals looks good, that's why im confused. - I heard it can be, when the rust perforing the wheel arches - but from passanger side all looks good.
Any suggestions are welcome
Pajero Pinin ad 1999 Japan production 1,8 GDI 3D
problem solved : reason's
problem solved :
reason's are 2 :
1'st - the door frame was a curve - and between external gasket and the car body was aprox 1mm space - so when i drive through the rain, water go to the internal gasket !!! - cause this internak gasket have U shape - middle of this U was somethhing like pipeline.. and water go through this pipeline ...
because on end of the gasket is completelly hidden - we have there masking plastic element - we are not abble to see when and how the water come to interior..
here is my picture where gasket ends. ( plastic cover demouted )
https://www.dropbox.com/s/ynqchfrdbhgzq6m/30.JPG
here i was try to show all of You where inside the gasket i had the water pipeline
https://www.dropbox.com/s/gs9e33b8zd5qtfp/Capture.JPG
and because we have on Pajero IO Pinin masked this by platic cover - we have no chance to know how it's happens.
what i do ? - correct door window frame shape - by hand ( some brutal punches ) and is right now ..
what i need to do : put some glue inside of the U shape of the gasket - I want to glue the gasket to the body ( fill U shape ) but i have no idea which glue i should to use.. here i have temperatures from over 50 celsius on the sun, to minus -35 celisus on the winter time.
small update Right Side is
small update Right Side is now FIXED...
Left one - i be waiting for better weather and i fix it immediatelly... .. i buy new windshield ... but that also didnt solve my problem ..
here is the another reason :
https://www.dropbox.com/sh/gw7wzz0yjeymbg1/AAAWTPgImfGaq-Wo2bTbVtVxa
my car was sold as "not
my car was sold as "not damaged" but thruth was different, on my case that was roof metal joining - right side of my car had probably not small accident..
i had totally wet roof lining too . . after big / heavy rain.
https://drive.google.com/open?id=0B02_tRmRoxoJc2JCc2lxX2Rmb00
on the pictures - i found water pipeline under the gasket.. this gasket is covered by plastic element who's definetelly mask my problem.
and the problem was also described here ( so im not alone ) http://www.pajerio.com/forum/remove-roof-bars-how
if you chceck the last photo .. as below..
you see about this seal / glue mass is totally damaged from old age ..
. but the second leaking was from "Hinge bonnet car hood" ? i have no clue how to say ..
i mark this places with red
https://drive.google.com/open?id=0B02_tRmRoxoJWE1sMDBIVEVYSW8
Bonnet Hinge
my car was sold as "not damaged" but thruth was different, on my case that was roof metal joining - right side of my car had probably not small accident..
i had totally wet roof lining too . . after big / heavy rain.
https://drive.google.com/open?id=0B02_tRmRoxoJc2JCc2lxX2Rmb00
on the pictures - i found water pipeline under the gasket.. this gasket is covered by plastic element who's definetelly mask my problem.
and the problem was also described here ( so im not alone ) http://www.pajerio.com/forum/remove-roof-bars-how
if you chceck the last photo .. as below..
you see about this seal / glue mass is totally damaged from old age ..
. but the second leaking was from "Hinge bonnet car hood" ? i have no clue how to say ..
i mark this places with red
https://drive.google.com/open?id=0B02_tRmRoxoJWE1sMDBIVEVYSW8
Thanks Cezare. did you replace all the gaskets? Plus do the bonnet hinges also have a gasket? I am new to this so before i start unbolting I need to prepare for this. Thanks mate.
is hard to say about on the
is hard to say about on the roof that was gasket - that looks like old bitumics mass or something like rubber mass .. yes i remove old one then i put new one there .. but last year i paint this car, thats why the problem is solved.
about the second issue - no idea.. that fixed for me Car tinsmith - when i repair car chassis. i ask them to fix, and they do that ..
here you can see some photos https://drive.google.com/open?id=0B02_tRmRoxoJUmxEX2ppVTllcjg
rust repair
is hard to say about on the roof that was gasket - that looks like old bitumics mass or something like rubber mass .. yes i remove old one then i put new one there .. but last year i paint this car, thats why the problem is solved.
about the second issue - no idea.. that fixed for me Car tinsmith - when i repair car chassis. i ask them to fix, and they do that ..
here you can see some photos https://drive.google.com/open?id=0B02_tRmRoxoJUmxEX2ppVTllcjg
Whoa, that is a lot of rust and lots of work to repair.
Happy io
Update on the leakage
I finally found where the leakage was from. Part of the frame holding the windshield on the drivers side had rusted. I had to remove the windshield and repair the area. It was a huge hole. After the repair and windshield replaced, no further leaks.
Syndicate
Air conditioning drain gets
Air conditioning drain gets blocked. Look up under rh side floor above clutch cylinder. Small black tube sticks out of firewall/floor about 15mm above bellhousing near back of motor
.